A Scene Switch is a Powerful Tool for Creating Sophisticated Lighting Control

A Scene Switch allows you to control all lights in a room or area. Lights may be turned on, off, dimmed, brightened, and set to four different scenes to provide limitless options for both security and aesthetic lighting in your home.

A Scene Switch is capable of controlling up to 7 UPB™ switches. Scene Switches may act as stand-alone devices to create simple lighting control for homeowners who do not desire a home control system.

Easy to Set Scenes

No home control system or software is required for you to change lighting scenes on a Scene Switch. The 4 scenes on a Scene Switch are easily set by first pressing the Scene Switch button that is to remember the scene, then setting the lights it controls to the desired levels, and then quickly pressing the same Scene Switch button 5 times in a row.

Remote Control

Scene Switch Remote Control

Scene Switches have an integrated infrared sensor and its buttons may be activated by a remote control. This remote control allows the homeowner to activate any button on the room's scene switch or any button on up to three other scene switches in the house.

Scene Switch Operation

Event	What Happens
Single-Tap On	Brightens the lights towards fully on
Double-Tap On	Snaps the lights to fully on
Hold Down On	Lights will slowly brighten until On button is released
Tap A	Changes light levels to what is configured for the scene associated with this button
Tap B	Changes light levels to what is configured for the scene associated with this button
Tap C	Changes light levels to what is configured for the scene associated with this button
Tap D	Changes light levels to what is configured for the scene associated with this button
Single-Tap Off	Starts dimming the light towards fully off
Double-Tap Off	Snaps the lights to fully off
Hold Down Off	Lights will slowly dim until Off button is released

Examples

Kitchen/Breakfast Room
Scene Switch

ON BUTTON
All lights on for setting the table or cleaning up. Full brightness allows you to see what you are doing.
A BUTTON
Morning scene for cooking and eating breakfast before school/work. The lights are dimmed to provide gentle light to wake up and get moving.
B BUTTON
Evening scene for dinner. The lights are set in a subdued setting perfect for casual dining.
C BUTTON
Homework scene. Turns off most of the lights in the kitchen, but fully illuminates the area over the breakfast room table.
D BUTTON
Birthday & Party scene. The lights are set to provide just enough light to enjoy the candles.
OFF BUTTON
All lights are turned off.

Great Room
Scene Switch

ON BUTTON
Full brightness for finding those keys or remote.
A BUTTON
A reading scene for glare-free reading.
B BUTTON
Movie scene to adjust lights for best contrast on the wide-screen.
C BUTTON
Party scene to adjust your lights for the proper party atmosphere.
D BUTTON
Nightcap scene for evenings when a nightcap may be enjoyed by the fireplace.
OFF BUTTON
All lights are turned off.

Custom Engraving

A Scene Switch may have its buttons custom engraved to "name" the scene for each button.

LED

The buttons glow dimly to act as a night light. The last activated button glows brightly using a blue color.

You may change to change the intensity, but not the color, of the LED on a Scene Switch, by using the HAI UPB™ UPStart configuration software (see below).

Colors

The default color for a Scene Switch is White. Scene Switch Color Change Kits, sold in case lots of 12 only, are available in White, Ivory, Almond, Light Almond, Brown, Grey, and Black.

Wallplate

No Wallplate is included when you purchase a Scene Switch. With the exception of the 1500W and 2400W models, HAI Lighting Control (HLC) switches accommodate standard Decora-style Wallplates. Mix and match to easily add a personalized touch to any room.

About HAI Lighting Control (HLC)

HLC Products work as stand-alone or with a Home Control System. An HAI home control system has the ability to change your light settings by the time of day, a set schedule, by the triggering of events (including motion), via a telephone call, Touchscreen, Smartphone, or by a computer connected to the Internet. To discover more about lighting control with an HAI home control system click here.

All HLC products are UL Listed and use Generation III Universal Powerline Bus (UPB™) – a digital communications standard for lighting and home control that ensures superior reliability. UPB™ has been extensively tested and researched in residential environments and found to be 99.9 percent reliable. UPB™ works over existing wires in a home and does not require new wiring.

Configuration Software

When used with an Omni family or Lumina family home control system HLC products automatically configure themselves, and outside software is not required.

HAI UPB™ UPStart configuration software will allow you to change the intensity, but not the color, of the LED on a Scene Switch.

Requirements / Recommendations

Scene Switches require a neutral (white) connection wire.
If you are using an HAI home control system with HLC switches, you must install a UPB™ PIM.
HAI recommends that every HAI Lighting Control (HLC) installation include a Phase Coupler.
To use the HAI Upstart Configuration software you must install a UPB™ PIM and use a UPB™ PIM to computer cable to connect it to a computer.

HAI Part Numbers

(Top of Page)

Image	HAI Part Number	Description
	38A00-1 38A00-1CS (Case of 12)	Scene Switch Control all lights in a room or area. Lights may be turned on or off, dimmed, brightened, and set to four different scenes. Setting a scene is as simple as pressing the scene button the Scene Switch five times. Has Infrared Receiver for use with Scene Switch Remote Control. Includes White Bezel, connectors, instructions. Color Change Kit Available. Custom Engraving Available.
	38A15-WH (White, no Scene Switch) 38A15-BL (Black, no Scene Switch) 38A16-WH (White, with Scene Switch) 38A16-BL (Black, with Scene Switch)	Table Top Scene Switch Cradle Manual The Table Top Scene Switch Cradle is used to table mount the Scene Switch (38A00-1), House Status Switch (38A00-2), or Lumina Mode Switch (38A00-3). You may purchase it in either Black or White and either with or without an HAI Scene Switch. The Table Top Scene Switch Cradle can be conveniently located throughout the home, including on a bedside nightstand, on the desk in a home office, or next to your favorite chair. It plugs directly into electrical outlet and has a cord length of 6 feet. The Table Top Scene Switch Cradle may be used in stand-alone lighting control or be used in lighting control within a home control system.
	38A14-1	Scene Switch Remote Manual Works with HAI's Scene Switch. Controls all lights in a room or area. White.
	38A04-ALCS (Almond) 38A04-LTACS (Light Almond) 38A04-BLCS (Black) 38A04-BRCS (Brown) 38A04-GRCS (Grey) 38A04-IVCS (Ivory) 38A04-WHCS (White)	Scene Switch and Lumina Mode Switch Color Change Kit Bezel for Scene Switch or Lumina Mode Switch and instructions. Order Kit in desired color. Sold in Case Lots of 12 only.
	38A06-2	Custom Legend Kit for Scene or House Status Switch Coupon & Instructions for custom laser engraved buttons for 6 button Scene Switch or 8 button House Status Switch. Mail in coupon, receive by mail.
	36A00-1 36A00-1CS (Case of 12)	UPB™ Powerline Interface Module (PIM) This PIM connects the UPB™ lighting system to an automation system or computer, which can then control the lights. The PIM makes the lighting system accessible through the home computer or from a remote location over the Internet. Comes with a cable for connecting the PIM to a serial port on an HAI home control system.
	36A05-2	UPB™ PIM to computer cable The UPB™ PIM to computer cable is used to connect the PIM to a computer's standard DB-9 serial port for use with HAI UPB™ UPStart configuration software.
	39A00-1 39A00-1CS (Case of 12)	Phase Coupler HLC is for single phase 120/240 VAC, 60 Hz systems. The HLC Phase Coupler mounts by the circuit breaker box and is used to connect the signal from L1 to L2 within the circuit breaker box. Although HLC is extremely robust and less susceptible to powerline conditions, HAI recommends the use of a Phase Coupler in every HLC installation. The LED on the Phase Coupler shows that it is working.